Search
Komoot app for Garmin: "Send to Device" feature – Transfer Tours to Garmin and update them while navigating
By using the komoot app for Garmin you have the option to transfer your komoot Tours within seconds to all your Garmin smartwatches or cycling computers, which are supported to use the komoot app. You can do so directly from the Route planner, from planned and completed Tours or even from Smart Tours that you find in the Discover section.
Furthermore, it is possible to update your running Tour via the komoot app on your phone and share the navigation instructions on the go. Updating the Tour is currently only possible for supported Garmin watches and by using the komoot navigation interface, not by using the native Garmin navigation.
Note: The requirement to share Tour updates, is to use the komoot navigation interface. Find out which devices are compatible with the komoot app for Garmin and which allow navigating with the komoot navigation: Garmin devices compatible with komoot.
Attention: In case your device doesn't support the komoot app for Garmin, refer to this article.
Requirements
Before sending Tours to your device, the following requirements must be matched:
- The komoot app for Garmin must be installed and logged into.
- Using the komoot app for Garmin version 3.6.4 or newer.
- Have the latest firmware (with Connect IQ Version at least 3.0.0) on the device.
- The device needs to be online.
- Watches: Connected over Bluetooth to a phone with the Garmin Connect app installed.
- Cycling computers: Can be either connected over Bluetooth to a phone with the Garmin Connect app installed or use the device WiFi.
Send Tours to device(s)
You can send Tours to your Garmin device either by the Android or iOS app or via the browser version. The option "Send to device" is available from the Route planner, the Tour profile page of planned and completed Tours and Smart Tours.
- Choose the Tour you want to send to your Garmin device(s).
- Click Send to Device ().
- Select Garmin.
- Open the komoot app for Garmin on your device.
- Depending on your device, click Open or confirm with the tick-icon () on the device.
This will open the Tour detail page on the device and the Tour is downloaded offline to the device. You could disconnect your device from your phone at this stage. Tapping on Start will start the navigation. If you have the komoot app for Garmin installed on multiple devices, the Tour will be sent to all of those devices.
From the Tour profile page of planned and completed Tours or Smart Tours, follow these instructions to send a Tour to Garmin.
- Choose the Tour you want to send to your Garmin device(s).
- Click Send to Device ().
- Select Garmin.
- Open the komoot app for Garmin on your device.
- Depending on your device, click Open or confirm with the tick-icon () on the device.
This will open the Tour detail page and the Tour is downloaded offline to the device. You could disconnect your device from your phone at this stage. Tapping on Start will start the navigation. If you have the komoot app for Garmin installed on multiple devices, the Tour will be sent to all of those devices.
Note: Ensure to have the komoot app for Garmin open to easily access the Tour. In case the komoot app for Garmin is closed, you should receive a notification to launch komoot to receive the Tour.
Update Tours during navigation
You can replan a running Tour via the komoot app on your phone or on the browser version and share the new navigation instructions with your Garmin device. The update of a running navigation is only possible by using the komoot navigation interface via the komoot app on the Garmin, which is currently only available on watches.
- Change your Tour via the app or on the Route planner on the Website.
- Click Send to Device ().
-
Select Garmin.
- Open the komoot app for Garmin on your device.
-
You find the dialog "Tour received. Update navigation?"
- Click Update.
The running navigation will be replaced and the Tour line and the navigation instructions updated.
Attention: The route update currently only works on watches which support the komoot navigation interface and are highlighted here. Garmin Edge computers currently cannot update an active navigation. To make this work for non-supported devices, the navigation needs to be ended, the required change made via the komoot app on the phone, and then the updated route opened again as a new Tour via the komoot app for Garmin.
FAQ
I sent a Tour but the device does not receive it
- Double check that the device is connected to the internet and logged into the komoot app for Garmin.
- Check if all above-mentioned requirements are matched.
- Ensure that your device has enough free memory available. Learn here how to delete Tours.
Tip: If you intend to use the "Send to Device" feature as your primary method of transferring Tours to your Garmin device(s), we recommend disabling the Course synchronization to ensure only the selected Tours get transferred. Here's a step-by-step guide on how to deactivate it.
What if I have more than one device connected
The Tour will be sent to all your devices that have the komoot app for Garmin installed and meet the requirements above.
I don't see the updated Tour on my device
In case you didn’t receive a notification about receiving or updating your komoot Tour, open the komoot app on your Garmin and accept the Tour from there. Make sure you allow notifications. When smartwatch are in battery saver mode or don't have enough memory, the notification may not be displayed.
Note: Check if your device is connected to the internet and if the latest komoot app for Garmin is installed.
I can't select a device to connect
In case you can't select "Garmin" as displayed in the above mention steps, please ensure:
- The komoot app for Garmin is installed on your device and you are logged in.
- You are logged in with the correct komoot account.
- You have at least one supported device successfully connected to your Garmin Connect account.
Articles in this section
- The komoot app for Garmin devices
- Disable komoot/ Garmin Courses synchronization
- Deleting komoot Tours from a Garmin device
- Komoot app for Garmin: Navigate and update Tours (manually)
- Komoot app for Garmin: Installation and connecting the accounts
- Komoot app for Garmin: "Send to Device" feature – Transfer Tours to Garmin and update them while navigating
- Komoot features available in the komoot App for Garmin
- Use komoot Tours with Garmin Courses Sync integration
- Garmin devices compatible with komoot
- Importing GPX- or FIT files manually to Garmin