Connecting your Panasonic e-bike display to komoot

The Panasonic NYT1955 Side Display allows you to connect your e-bike to komoot via Bluetooth. Once paired, the display will show turn-by-turn navigation instructions from komoot, helping you stay on the right track while cycling.

Key Features of the Panasonic Display with komoot

Displays navigation instructions directly from the komoot app.
Shows speed, distance, battery level, and assist mode.
Bluetooth connectivity enables real-time route guidance.
Navigation screen can be enabled or hidden via display settings.

Establishing the Connection Between Panasonic Device and komoot

Step 1: Enable Bluetooth on Your Smartphone and Side Display

Ensure Bluetooth is turned on for both devices.
Keep your smartphone within 1 meter of the Panasonic display.

Step 2: Pairing the Panasonic Display with komoot

On the Panasonic Side Display, press and hold both the night mode button and information button for 3 seconds to access settings.
Navigate to Bluetooth settings.
Select komoot and then choose Connect.
On your smartphone, open the komoot app and go to Bluetooth Connect settings.
Select Panasonic Device and start pairing.
Once the connection is successful, PAIRING SUCCESSFUL, will appear on the display.

Step 3: Enabling Navigation Display (Optional)

If the navigation screen is hidden, go to Bluetooth settings.
Select Navigation.
Select ON.
This ensures turn-by-turn instructions appear on the display while riding.

Functionality and Limitations of Your Panasonic Device with komoot

What Your Panasonic Display Can Do with komoot

Show turn-by-turn navigation directly from the komoot app.
Display distance to the next turn and street names.
Show real-time speed, battery level, and assist mode.

Limitations to Keep in Mind

The Panasonic display does NOT store routes; it only mirrors navigation from komoot.
Bluetooth must remain connected for continuous navigation updates.
Navigation screen may be hidden by default—must be manually enabled in settings.

Troubleshooting Bluetooth Connection Issues

Basic Troubleshooting Steps

Check for software updates on both the komoot app and your e-bike display.
Ensure Bluetooth is turned on for both the side display and smartphone.
Keep the devices within 1 meter of each other during pairing.
Restart both devices and attempt pairing again.

Reconnecting and Resetting Bluetooth

On the Panasonic display, go to Bluetooth settings komoot and select Disconnect.
Then, reconnect by selecting Connect and following the pairing process again.

Checking Bluetooth Profiles

Some Bluetooth profiles may work better than others. Try selecting a different Bluetooth mode from the settings.

Resetting the Display (If Needed)

If connection issues persist, perform a factory reset by selecting Factory Reset in the display settings.

Note: This will reset all customized settings.

Need Further Assistance? For further questions about connecting your Panasonic e-bike display to komoot, refer to the official Panasonic manual.

komoot